GS101 LoRaWAN Gas Detector
GS101 is a LoRaWAN residential gas detector that detects natural gas leaks and sends alarms. When the concentration caused by a gas leak reaches the preset threshold, the detector will trigger both an LED light alarm and a buzzer sound alarm; it also supports controlling outputs to close the gas valve and open the vent fans to prevent potential accidents.
Apart from local alarms, GS101 can also report the normal status of the device and alarm messages remotely by the use of LoRaWAN technology. Integrating with Milesight LoRaWAN gateway and Milesight IoT Cloud solution, users can monitor all the sensor data and control the device remotely and visually.
Makes a Safer Place For All
GS101 LoRaWAN Gas Detector
- Event Trigger
- Built-in Self-Test Function
- Ultra Safe Gas Alarm Threshold
- 800 Records Historical Data Storing Capacity
Puts Indoor Safety into Focus
Event Trigger
LoRaWAN® gas sensor is equipped with relay output and solenoid valve output to control external appliances locally such as gas valves and vent fans, reducing potential safe accidents.
*The fan and valve can be controlled simultaneously.
Accidental gas leaks pose a threat to people’s life and properties. Residents need to be alerted as soon as possible once the gas leaks.
Milesight GS101 is a LoRaWAN® residential gas detector that allows you to detect methane (CH4) leakage in houses, apartments, hotels, etc., and avoids potential damage before danger occurs.
LoRaWAN® Based
Milesight Wall Switch is compatible with industry-standard LoRaWAN® gateways with a range of up to 15 km in rural areas and 2 km in urban areas.
Easy Configuration
1st Step
Install the Milesight ToolBox
2nd Step
Enable NFC and run ToolBox,
attach your phone to the device.
3rd Step
Verify the password and start configuring.
Features
- Built-in semiconductor gas detection sensor with 5-year-long life expectancy and no calibration needed
- High sensitivity gas leak detection and support 8% LEL alarm threshold
- Equipped with buzzer and light indicators to indicate the device powered, faulty, alarmed, and invalid status
- Equipped with a test button to test the device’s normal or abnormal status
- Equipped with outputs for controlling external appliances such as gas valves and vent fans, reducing potential accidents
- Store 800 historical records locally in 7 types and unable to reset
- Built-in NFC for easy configuration
- Compatible with standard LoRaWAN® gateways and network servers
- Quick and easy management with Milesight IoT Cloud solution
Specifications
Wireless Transmission
Technology: LoRaWAN®
Frequency: CN470/IN865/RU864/EU868/US915/AU915/KR920/AS923-1&2&3&4
Tx Power: 16 dBm (868 MHz)/22 dBm (915 MHz)/19 dBm (470 MHz)
Sensitivity: -137dBm
Mode: OTAA/ABP Class C
Measurement and Alarms
Detecting Gas: Methane (CH4)
Detection Principle: Semiconductor Sensor
Warm-up Time: About 180s
Alarm Level: 8% LEL
Alarm Type: Sound, Light
Alarm Volume: 85 dBA @1 Meter
Working Lif:e 5 Years (In Clear Air)
Others
Output Signal
1 × Relay Output: normally open, max 250 VAC/10A,
1 × Solenoid Valve Output: 12V, 100ms Pulse Output
Button
1 × Test/Mute/Reset/Reboot Button
LED Indicators
1 × Power (Green), 1 × Fault (Yellow), 1 × Alarm (Red), 1 × Invalid (Yellow)
Configuration
Mobile App via NFC
Historical Records Storage
Alarm Records, Alarm Dismissed Records, Device Fault Records, Device Fault Recovered Records, Device Power On Records, Device Power Off Records, Device Invalid Records
Physical Characteristics
Power Connector: DC Jack Connector
Power Supply: 12VDC, 1A
Operating Temperature: -10°C to +55°C
Relative Humidity: 0% to 95% (non-condensing)
Ingress Protection: IP30
Dimension: 120 × 85 × 32.5 mm (4.72 × 3.35 × 1.28 in)
Material & Color: PC+ABS (Flame Retardant), White
Installation: Wall Mounting
Reviews
There are no reviews yet.