You may be interested in…

4 in stock

Kerlink POE Injector - 30 W Indoor - AC Input - Choovio IoT Solutions

Kerlink POE Injector KLK03506 – 30 W Indoor – AC Input – KLK03506

$78.00

Out of stock

Kerlink Wirnet iStation Outdoor LoRaWAN Gateway – PDTIOT-ISS05

Rated 5.00 out of 5

$714.00

Out of stock. Join the waitlist to be notified when this product becomes available.

Kerlink POE Injector – 30 W Outdoor – AC Input – KLK03596

SKU: KLK03596 Brand: Kerlink

$420.00

Type: SCT-013-000 Current Transformer
Opening Size: 13mm ¡Á 13mm
Frequency: 50HZ-150KHZ
Open-close transformer SCT-013
Rated input current: 100A
Rated input current: 60A / 100A

3 in stock

This PoE midspan is a 30W single port solution for powering Kerlink’s Wirnet concentrators with AC power.

It has a white aluminum case with a waterproof power supply terminal block and two RJ45 ports protected by two cable glands. One RJ45 port is for Ethernet input; the other is for Ethernet + Power output.

There is no LEDs for diagnostic functions but the ethernet connectors LEDs are still visible before closing the cables gland.

This PoE injector provides 55Vdc, 550mA with AC input voltage (up to 30W) over the entire temperature range -40°C to 65°C.
Automatic detection and protection of non-standard Ethernet terminals is implemented.

Each line has surge protection.

Kerlink POE Injector - 30 W Outdoor - AC Input brackets 2

Features

Ethernet data rates			10/100/1000Base-T
Number of ports			1
PoE compatibility			IEEE 802.3at
			IEEE 802.3af
PoE Output Power			30 Watts
PoE Output Voltage			55 VDC
PoE Pin Assignment and Polarity			Power Pairs 7/8 (-) and 4/5 (+)
Input Power Requirements			AC Input Voltage: 100 to 240 VAC
			AC Input Current: 1.5A @100-240VAC
			AC Frequency: 50 to 60 Hz
Dimensions (without power supply terminal block)			65 mm (W) x 269 mm (H) x 176 mm (L)
Weight			1,8kg
Connectors			Shielded RJ-45
Indicator			RJ45 LEDs before closing the cables gland
Operating Ambient Temperature			-40°C to +65°C
IP rated			IP67
Operating Humidity			20% to 80%, non-condensing
Storage Temperature			-40°C to +85°C
Storage Humidity			10% to 95%, non-condensing
Surge protection			Protected line: 1,2,3,4,5,6,7,8 Common mode surge protection (10/700us) : 6KV Differential mode surge protection (10/700us) : 1,5KV
Regulatory compliance			RoHS
Electromagnetic Emission & Immunity			FCC CFR47 Part 15
			EN 55024 (Immunity)
			EN 55032 (Compatibility)
Safety Approvals			CE FCC