Kerlink RF Surge Protection for Outdoor Ethernet Link – KLK03639

RF Surge Protection for Outdoor Ethernet Link

The KLK03639 is designed to protect POE ++ and Ethernet Category 6A networks. The product is equipped with RJ45 shielded connectors for fast wiring. Based on hybrid diagram made with gas tubes and low capacitance clamping diodes, this surge protector is ideally suited for PoE-connected devices. The product is designed for wall mounting and outdoor application, notably through his protection rating (IP66) and its UV rated thermoplastic (UL94-V0). Note, the product can also be installed indoor.

Network POE ++ and 10Gigabit
Ethernet
Network POE ++ and 10Gigabit
Ethernet
Nominal line voltage: Un 48Vdc
Max. DC operating voltage: Uc 60 Vdc
Max frequency: fmax 500 MHz
Max. data rate: 10 Gbps (6A)
Insertion loss: < 1 dB
Max. load current: iL 2000mA
Protection level Following the test category C3 (IEC61643- 21) – Line/Line: Up 70V
Impulse current2 x 10/350µs Test – D1 Category: Iimp 500A
Line/Line Nominal discharge current C2 Category: In L/L 500A
Line/Ground Nominal discharge current 8 /20µs Test x 10 – C2 Category: In L/PE
Technology: GDT+Clamping diode
SPD configuration: 8 wires+shielded
Connection to Network: RJ45 shielded connectors Female input/output
Format: Plastic Box with connectors input/output – Reinforced seal
Mounting: Wall – Outdoor and Indoor
Accessory(s) provided: screw + nut + cable shoe
Housing material: Thermoplastic UL94 V-0
Operating temperature: Tu -40/+85°C
Protection rating: IP66
Outdoor application: Yes
Failsafe mode: Short-circuit
Pinout: (1-2)(3-6)(4-5)(7-8)
Dimensions: See diagram
Weight: 0.291 kg
Standards compliance: IEC 61643-21/ EN 61643-21 /
UL497B IEEE 802-3af/3at/3bt/
ANSI/TIA-568-C.1