Dragino LTC2-FT Industrial Flat Objects Temperature Transmitter

The Dragino LTC2-FT Industrial LoRaWAN Flat Objects Temperature Transmitter monitors different environments. It supports reading PT100 probe and converting the value to temperature and
uplink to IoT server via LoRaWAN protocol.

LTC2-FT supports the datalog feature. Users can retrieve the sensor value via the LoRaWAN downlink command.

LTC2 Industrial LoRaWAN Flat Objects Temperature Transmitter is powered by an 8500mA Li-SOCI2 battery for long-time measurement. The battery can run 2~10 years depending on the network environment and working mode.

Each LTC2 has two internal 16 bit ADC interfaces and is calibrated on 12 set resistors to ensure the accurate measurement is wide.

LTC2-FT Industrial LoRaWAN Flat Objects Temperature Transmitter

This device is LoRaWAN v1.0.3 compatible. Each LTC2 is pre-load with a set of unique keys for LoRaWAN registration, register these keys to the local LoRaWAN server, and it will auto-connect after powering on.

• LoRaWAN Temperature Transmitter 1.0.3 Class A
• Worldwide LoRaWAN frequency band
• Max: 2 x monitor temperature channels
• Support 3 -wire PT-100
• 8500mAh Li-SOCI2 Battery
• Firmware upgrade via console
• Wall Mountable
• Configurable via LoRa or UART
• Datalog and retrieve via LoRaWAN
• Use pre-load PT100 probe or 3rd PT100 probe
• Factory calibration for different resistance range
• Support accuracy measure of resistance and upload
• Battery Monitoring and upload
• Auto-sync time with LoRaWAN Server
• Datalog and retrieve via LoRaWAN downlink
• Parameters configurable via LoRaWAN downlink
• PT100 Probe
  — Installation: Insert
  — Measure Range: -50 ~ 200 °C
  — Dimension: 8*25mm

Applications:

• Logistics and Supply Chain Management
• Food management.
• Cold chains solution
• Industrial Monitoring and Control

Package Includes:

• 1 x LTC2  Industrial LoRaWAN Temperature Transmitter

Dimensions and Weight:

• Device Size: 150 x 120 x 55mm